Protocol Implementation Conformance Statement Template

for NI-Industrial Communications for IEC 61850

 

 

Based on IEC 61850-8-1

 

 


Conformance

1     Notation

For the following Clause, the following definitions apply:

      m: mandatory support. The item shall be implemented.

      c: conditional support. The item shall be implemented if the stated condition exists.

      o: optional support. The implementation may decide to implement the item.

      x: excluded. The implementation shall not implement this item.

      i: out-of-scope. The implementation of the item is not within the scope of this standard.

      F/S: Functional Standard. Should be applied.

      Base: Shall be applied in any application claiming conformance to this standard.

2     PICS

2.1   Profile conformance

 

Table 1 – PICS for A-Profile support

A-Profile shortcut

Profile Description

Client

Server

Value/comment

F/S

 

F/S

 

A1

Client/server A-Profile

c1

c1

Refer to IEC 61850-8-1 6.2

A2

GOOSE/GSE management A-Profile

c2

c2

Refer to IEC 61850-8-1 6.3

A3

GSSE A-Profile

c3

 

c3

 

Refer to IEC 61850-8-1 6.4

A4

TimeSync A-Profile

c4

 

c4

 

Refer to IEC 61850-8-1 6.5

c1   Shall be ‘m’ if support for any service specified in 61850-8-1 Table 2 are declared within the ACSI basic conformance statement.

c2   Shall be ‘m’ if support for any service specified in 61850-8-1 Table 6 are declared within the ACSI basic conformance statement.

c3   Shall be ‘m’ if support for any service specified in 61850-8-1 Table 9 are declared within the ACSI basic conformance statement.

c4   Support for at least one other A-Profile shall be declared (e.g. in A1-A3) in order to claim conformance to IEC 61850-8-1.

 

Table 2 – PICS for T-Profile support

T-Profile

Profile Description

Client

Server

Value/Comment

F/S

 

F/S

 

T1

TCP/IP T-Profile

c1

c1

Refer to 61850-8-1 6.2

T2

OSI T-Profile

c2

OSI

c2

OSI

Refer to 61850-8-1 6.2

T3

GOOSE/GSE T-Profile

c3

c3

Refer to 61850-8-1 6.3

T4

GSSE T-Profile

c4

 

c4

 

Refer to 61850-8-1 6.4

T5

TimeSync T-Profile

o

 

o

 

Refer to 61850-8-1 6.5

c1 Shall be ‘m’ if support for A1 is declared. Otherwise, shall be 'i'.

c2 Shall be “o” if support for A1 is declared. Otherwise, shall be 'i'.

c3 Shall be ‘m’ if support for A2 is declared. Otherwise, shall be 'i'.

c4 Shall be ‘m’ if support for A3 is declared. Otherwise, shall be 'i'.

 

2.2   MMS conformance

The following conformance statements are conditional upon the support of the client/server A-Profile being declared.

Except where present, MMS conformance shall be in accordance with ISO/ISP 14226-2.

2.2.1      Character sets

2.2.1.1   MMS identifier

The MMS Identifier shall be constrained to BasicIdentifier.

The use of ExtendedIdentifier is deprecated.

2.2.1.2   MMSString

The MMS String shall be constrained to use the ISO646String character set. All other character sets are deprecated.

2.2.1.3   ObjectName

The MMS ObjectName shall be constrained to use BasicIdentifier. All other character sets are deprecated.

2.2.2      Environmental services

2.2.2.1   Initiate conformance

Table 3 and Table 4 specify the conformance of the initiate service.

 

Table 3 – MMS InitiateRequest general parameters

InitiateRequest

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

InitiateRequest

 

 

 

 

 

 

localDetailCalling

m

m

65000

m

m

65000

proposedMaxServOutstandingCalling

m

m

6

m

m

6

proposedMaxServOustandingCalled

m

m

6

m

m

6

initRequestDetail

m

m

m

m

 

 

 

 

 

 

 

InitiateRequestDetail

 

 

 

 

 

 

proposedVersionNumber

m

m

1

m

m

1

proposedParameterCBB

m

m

See 2.2.2.1.2

m

m

See 2.2.2.1.2

servicesSupportedCalling

m

m

See 2.2.2.1.1

m

m

See 2.2.2.1.1

additionalSupportedCalling

c1

x

 

c1

x

 

additionalCbbSupportedCalling

c1

x

 

c1

x

 

privilegeClassIdentityCalling

c1

x

 

c1

x

 

c1 Conditional upon Parameter CBB CSPI – see Table 6.

 

 

Table 4 – MMS InitiateResponse general parameters

InitiateResponse

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

InitiateResponse

 

 

 

 

 

 

localDetailCalled

m

m

65000

m

m

65000

negotiatedMaxServOutstandingCalling

m

m

6

m

m

6

negotiatedMaxServOustandingCalled

m

m

6

m

m

6

initResponseDetail

m

m

m

m

 

 

 

 

 

 

 

InitiateResponseDetail

 

 

 

 

 

 

negotiatedVersionNumber

m

m

1

m

m

1

negotiatedParameterCBB

m

m

See 2.2.2.1.2

m

m

See 2.2.2.1.1

servicesSupportedCalled

m

m

See 2.2.2.1.1

m

m

See 2.2.2.1.1

additionalSupportedCalled

c1

x

 

c1

x

 

additionalCbbSupportedCalled

c1

x

 

c1

x

 

privilegeClassIdentityCalled

c1

x

 

c1

x

 

c1 Conditional upon Parameter CBB CSPI – see Table 6.

 

2.2.2.1.1       Services supported

Table 5 defines the service support requirement, and restrictions, for this standard. Relationship to ACSI services can be found in 61850-8-1 Table 1.

 

Table 5 – MMS service supported conformance table

MMS service supported CBB

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

status

o

o

 

o

m

 

getNameList

o

o

o

c1

identify

o

o

m

m

rename

o

o

 

o

o

 

read

o

o

o

c2

write

o

o

o

c3

getVariableAccessAttributes

o

o

o

c4

defineNamedVariable

o

o

 

o

o

 

defineScatteredAccess

o

i

 

o

i

 

getScatteredAccessAttributes

o

i

 

o

i

 

deleteVariableAccess

o

o

 

o

o

 

defineNamedVariableList

o

o

o

o

 

getNamedVariableListAttributes

o

o

o

c5

deleteNamedVariableList

o

o

o

c6

 

defineNamedType

o

i

 

o

i

 

getNamedTypeAttributes

o

i

 

o

i

 

deleteNamedType

o

i

 

o

i

 

input

o

i

 

o

i

 

output

o

i

 

o

i

 

takeControl

o

i

 

o

i

 

relinquishControl

o

i

 

o

i

 

defineSemaphore

o

i

 

o

i

 

deleteSemaphore

o

i

 

o

i

 

reportPoolSemaphoreStatus

o

i

 

o

i

 

reportSemaphoreStatus

o

i

 

o

i

 

initiateDownloadSequence

o

i

 

o

i

 

downloadSegment

o

i

 

o

i

 

terminateDownloadSequence

o

i

 

o

i

 

initiateUploadSequence

o

i

 

o

i

 

uploadSegment

o

i

 

o

i

 

terminateUploadSequence

o

i

 

o

i

 

requestDomainDownload   

o

i

 

o

i

 

requestDomainUpload

o

i

 

o

i

 

loadDomainContent    

o

i

 

o

i

 

storeDomainContent   

o

i

 

o

i

 

deleteDomain

o

i

 

o

i

 

getDomainAttributes    

o

o

 

o

c14

 

createProgramInvocation   

o

i

 

o

i

 

deleteProgramInvocation   

o

i

 

o

i

 

start

o

i

 

o

i

 

stop

o

i

 

o

i

 

resume

o

i

 

o

i

 

reset

o

i

 

o

i

 

kill

o

i

 

o

i

 

getProgramInvocationAttributes

o

i

 

o

i

 

obtainFile

o

c9

 

o

c9

 

defineEventCondition

o

i

 

o

i

 

deleteEventCondition

o

i

 

o

i

 

getEventConditionAttributes

o

i

 

o

i

 

reportEventConditionStatus

o

i

 

o

i

 

alterEventConditionMonitoring

o

i

 

o

i

 

triggerEvent 

o

i

 

o

i

 

defineEventAction

o

i

 

o

i

 

deleteEventAction

o

i

 

o

i

 

alterEventEnrollment

o

i

 

o

i

 

reportEventEnrollmentStatus

o

i

 

o

i

 

getEventEnrollmentAttributes

o

i

 

o

i

 

acknowledgeEventNotification

o

i

 

o

i

 

getAlarmSummary

o

i

 

o

i

 

getAlarmEnrollmentSummary

o

i

 

o

i

 

readJournal  

o

c13

 

o

c13

 

writeJournal

o

o

 

o

o

 

initializeJournal   

o

o

 

o

c12

 

reportJournalStatus

o

i

 

o

i

 

createJournal

o

i

 

o

i

 

deleteJournal

o

i

 

o

i

 

fileOpen

o

c8

o

c8

fileRead 

o

c8

o

c8

fileClose

o

c8

o

c8

fileRename

o

i

 

o

i

 

fileDelete

o

c9

o

c9

fileDirectory 

o

c11

o

c11

unsolicitedStatus 

o

i

 

o

i

 

informationReport

o

c7

o

c7

eventNotification 

o

i

 

o

i

 

attachToEventCondition

o

i

 

o

i

 

attachToSemaphore    

o

i

 

o

i

 

conclude

m

m

m

m

cancel   

o

o

 

o

m

 

getDataExchangeAttributes

o

c10

 

o

c10

 

exchangeData

o

c10

 

o

c10

 

defineAccessControlList    

o

c10

 

o

c10

 

getAccessControlListAttributes

o

c10

 

o

c10

 

reportAccessControlledObjects

o

c10

 

o

c10

 

deleteAccessControlList

o

c10

 

o

c10

 

alterAccessControl

o

c10

 

o

c10

 

reconfigureProgramInvocation

o

c10

 

o

c10

 

c1 Shall be ‘m’ if logical device or logical node model support is declared in ACSI basic conformance statement.

c2 Shall be ‘m’ if logical node model support is declared in ACSI basic conformance statement or if support for the MMS write service is declared.

c3 Shall be ‘m’ if ACSI support for SetDataValues service is declared or implied.

c4 Shall be ‘m’ if logical node model support is declared in ACSI basic conformance statement.

c5 Shall be ‘m’ if data set support is declared in the ACSI basic conformance statement.

c6 Shall be ‘m’ if support for defineNamedVariableList is declared.

c7 Shall be 'm' if support for ACSI Report or ACSI command termination is declared.

c8 Shall be 'm' if support for ACSI GetFile is declared.

c9 Shall be 'm' if support for ACSI SetFile is declared.

c10 Shall not be present since MMS minor version is declared to be 1.

c11 Shall be 'm' if support for ACSI GetFileAttributeValues is declared.

c12 Shall be 'm' if support for the ACSI log model is declared.

c13 Shall be 'm' if support for the ACSI QueryLogByTime or QueryLogAfter is declared.

c14 Shall be 'm' if support for the ACSI logical device model is declared.

 


2.2.2.1.2       Parameter CBB

The specific settings for the MMS parameter CBB is specified in Table 6.

 

Table 6 – MMS Parameter CBB

MMS parameter CBB

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

STR1

o

o

o

c1

STR2

o

o

o

o

NEST

1

1 or greater

10

1

c2

10

VNAM

o

o

o

c1

VADR

o

o

 

o

o

 

VALT

o

o

o

c1

bit 5

x

x

 

x

x

 

TPY

o

o

 

o

o

 

VLIS

o

c1

o

c3

bit 8

x

x

 

x

x

 

bit 9

x

x

 

x

x

 

CEI

o

i

 

o

i

 

ACO

o

c4

 

o

c4

 

SEM

o

c4

 

o

c4

 

CSR

o

c4

 

o

c4

 

CSNC

o

c4

 

o

c4

 

CSPLC

o

c4

 

o

c4

 

CSPI

o

c4

 

o

c4

 

c1 Shall be ‘m’ if ACSI logical node model support declared.

c2 Shall be five(5) or greater if ACSI logical node model support is declared.

c3 Shall be ‘m’ if ACSI data set, reporting, GOOSE, or logging model support is declared.

c4 Shall not be present. Receiving implementations shall assume not supported.

 


2.2.2.2   GetNameList conformance

Table 7 defines the conformance of the GetNameList service.

 

Table 7 – GetNameList conformance statement

GetNameList

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

Request

 

 

 

 

 

 

ObjectClass

m

m

m

m

ObjectScope

m

m

m

m

DomainName

o

o

m

m

ContinueAfter

o

m

m

m

Response+

 

 

 

 

 

 

 List Of Identifier

m

m

m

m

 MoreFollows

m

m

m

m

Response–

 

 

 

 

 

 

 Error Type

m

m

m

m

NOTE Object class ‘vmd' (formerly VMDSpecific in MMS V1.0) shall not appear. If a request contains this ObjectClass, an MMS Reject shall be issued.

 

2.2.3      Variable access conformance

2.2.3.1   Supporting productions

2.2.3.1.1       AlternateAccessSelection

Table 8 defines the conformance of the alternate access selection.

 

Table 8 – AlternateAccessSelection conformance statement

AlternateAccessSelection

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

accessSelection

o

o

o

m

 component

o

o

o

m

 index

o

i

o

i

 indexRange

o

i

 

o

i

 allElements

o

i

 

o

x

alternateAccess

o

o

o

m

selectAccess

o

o

o

m

 component

o

o

o

m

 index

o

i

o

i

 indexRange

o

i

 

o

i

 allElements

o

i

 

o

x

 


2.2.3.1.2       VariableAccessSpecification

Table 9 defines the conformance of the variable access.

 

Table 9 – VariableAccessSpecification conformance statement

VariableAccessSpecification

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

listOfVariable

o

o

o

c1

 variableSpecification

o

o

o

c1

 alternateAccess

o

o

o

c1

variableListName

o

o

o

c2

c1 Shall be ‘m’ if ACSI support for Logical Node Model is declared.

c2 Shall be ‘m’ if ACSI support for ACSI DataSets, reporting, or logging is declared.

 

2.2.3.1.3       VariableSpecification

Table 10 defines the conformance of the variable specification.

 

Table 10 – VariableSpecification conformance statement

VariableSpecification

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

name

o

o

o

m

address

o

o

 

o

i

 

variableDescription

o

o

o

i

scatteredAccessDescription

o

x

 

o

x

 

invalidated

o

x

 

o

x

 

 

2.2.3.2   Read

Table 11 defines the conformance of the read service.

 

Table 11 – Read conformance statement

Read

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

Request

 

 

 

 

 

 

 specificationWithResult

o

o

o

m

 variableAccessSpecification

m

m

See 2.2.3.1.2

m

m

See 2.2.3.1.2

Response

 

 

 

 

 

 

 variableAccessSpecification

o

o

o

m

 listOfAccessResult

m

m

m

m

 


2.2.3.3   Write

Table 12 defines the conformance of the write service.

 

Table 12 – Write conformance statement

Write

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

Request

 

 

 

 

 

 

 variableAccessSpecification

m

m

See 2.2.3.1.2

m

m

See 2.2.3.1.2

 listOfData

m

m

m

m

Response

 

 

 

 

 

 

 failure

m

m

m

m

 success

m

m

m

m

 

2.2.3.4   InformationReport

Table 13 defines the conformance of the InformationReport service.

 

Table 13 – InformationReport conformance statement

InformationReport

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

Request

 

 

 

 

 

 

 variableAccessSpecification

 

 

m

m

See 2.2.3.1.2

m

m

See 2.2.3.1.2

 listOfAccessResult

m

m

m

m

 

2.2.3.5   GetVariableAccessAttributes

Table 14 defines the conformance of the GetVariableAccessAttributes service.

 

Table 14 – GetVariableAccessAttributes conformance statement

GetVariableAccessAttributes

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

Request

 

 

 

 

 

 

 name

o

o

m

m

 address

o

o

 

m

x

 

Response

 

 

 

 

 

 

 mmsDeletable

m

m

m

m

 address

o

x

 

o

x

 

 typeSpecification

m

m

m

m

 


2.2.3.6   DefineNamedVariableList

Table 15 defines the conformance of the DefineNamedVariableList service.

 

Table 15 – DefineNamedVariableList conformance statement

DefineNamedVariableList

Client-CR

Server-CR

Base

F/S

Value/range

Base

F/S

Value/range

Request

 

 

 

 

 

 

 variableListName

m

m

m

m

 

 listOfVariable

m

m

m

m

 

 variableSpecification

m

m

m

m

 

 alternateAccess

o

i

 

o

m

 

Response

m

m

 

m

m

 

 

2.2.3.6.1       GetNamedVariableListAttributes

Table 16 defines the conformance of the GetNamedVariableListAttributes service.

 

Table 16 –GetNamedVariableListAttributes conformance statement

GetNamedVariableListAttributes

Client-CR

Server-CR