NI-DAQ 8.0.1 Readme
Copyright 2003–2006 National
Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced
or transmitted in any form, electronic or mechanical, including photocopying,
recording, storing in an information retrieval system, or translating, in whole
or in part, without the prior written consent of National Instruments
Corporation.
National Instruments, NI, ni.com,
and LabVIEW are trademarks of National Instruments Corporation. Refer to the
Terms of Use section on ni.com/legal for
more information about National Instruments trademarks.
FireWire® is the registered trademark of Apple Computer,
Inc.
Handle Graphics®, MATLAB®, Real-Time Workshop®,
Simulink®, and Stateflow® are registered trademarks, and
TargetBox2, xPC TargetBox2, and Target
Language Compiler are trademarks of The MathWorks, Inc.
Tektronix® and Tek are registered trademarks of Tektronix,
Inc.
Other product and company names mentioned herein are trademarks
or trade names of their respective companies.
Members of the National Instruments Alliance Partner Program are
business entities independent from National Instruments and have no agency,
partnership, or joint-venture relationship with National Instruments.
Thank you for using NI-DAQ, version 8.0.1. This release
differs from 8.0 with the inclusion of the following change:
- Adjusted analog output calibration algorithm for M Series devices.
|
The Readme contains the following main sections:
NI-DAQ 7.x and Later Software
This section provides an overview of NI-DAQmx and Traditional
NI-DAQ (Legacy). National Instruments measurement devices are packaged with
NI-DAQ driver software, an extensive library of VIs and ANSI C
functions you can call from your application software, such as LabVIEW or
LabWindows™/CVI™, to program your NI measurement devices.
Measurement devices include DAQ devices such as the M Series multifunction I/O
(MIO) devices, signal conditioning modules, and switch modules. Driver software
has an application programming interface (API ), which is a library of
VIs, functions, classes, attributes, and properties for creating applications
for your device.
NI-DAQ 7.x and later includes two NI-DAQ drivers,
NI-DAQmx and Traditional NI-DAQ (Legacy), each with its own APIs, hardware
configuration, and software configuration.
Choosing the API to Use
This section includes information on choosing the right API for
your device and application.
NI-DAQmx
NI-DAQmx is the latest NI-DAQ driver with new VIs and functions
and development tools for programming measurement devices. You should install
and use NI-DAQmx if you are using devices supported by NI-DAQmx; refer to Device Support. If you are using a TEDS sensor, you can
use only NI-DAQmx.
If you are using NI application software with NI-DAQmx, you must
use
LabVIEW, LabWindows/CVI, or Measurement Studio version 7.x and later,
VI Logger 2.x, or the LabVIEW Real-Time Module 7.1 or later.
To use Visual C# or Visual Basic.NET, you must use NI-DAQmx.
You can also use supported versions of Visual Studio to create
NI-DAQmx applications with Visual Basic 6.0 and ANSI C.
Traditional NI-DAQ (Legacy)
Traditional NI-DAQ (Legacy) is an older driver with outdated
APIs for developing data acquisition, instrumentation, and control applications
for older National Instruments DAQ devices. Traditional NI-DAQ (Legacy) has the
same VIs and functions and works the same way as NI-DAQ 6.9.3, except you can
use Traditional NI-DAQ (Legacy) and NI-DAQmx on the same computer, and some
hardware and software is no longer supported.
You should use Traditional NI-DAQ (Legacy) only in
certain circumstances.
- You have a device that is not supported by NI-DAQmx, such as the AT E
Series multifunction DAQ devices; refer to Device
Support.
- You are using LabWindows/CVI or Measurement Studio version
6.x.
- You have existing NI-DAQ 6.9.x or Traditional NI-DAQ (Legacy)
applications that you cannot port to NI-DAQmx now. You can continue to use
applications developed in Traditional NI-DAQ (Legacy) that control older devices
in the same system with NI-DAQmx applications for newer devices. Refer to Using NI-DAQmx and Traditional NI-DAQ (Legacy) on the Same
Computer.
- You have an NI modular instrument device that requires Traditional NI-DAQ
(Legacy).
New Features
The following main features were added in this release. For more
on features included with Measurement & Automation Explorer (MAX), refer to
the Measurement & Automation Explorer Help for NI-DAQmx. For
information on other features, refer to the NI-DAQmx Help.
- Newly supported devices in NI-DAQmx—PCIe-6251, PCIe-6259, PXI-2576,
PXI-2584, PXI-2594, PXI-2595, PXI-2596, PXI-2597, PXI-2598, PXI-2599, SCXI-1194,
and SCXI-1195 are now supported in NI-DAQmx. Refer to Device Support for a complete list of devices.
- NI-DAQmx I/O Server—Using the NI-DAQmx I/O Server, you can configure
distributed applications to combine remote data applications. You can connect to
the NI-DAQmx I/O Server through either LabVIEW 8.0 or through a third-party OPC
client.
- NI-DAQmx Device Monitor—When NI-DAQmx now detects a USB device, a
Windows-style dialog box allows you to run test panels, launch MAX, launch VI
Logger, and other associated tasks.
- Human-readable configuration import/export from MAX—NI-DAQmx
configuration data can now be output as an editable text file for import and
export in MAX.
- Improvements to DAQ Assistant—A number of usability and feature
enhancements have been made to DAQ Assistant, including the ability to
programmatically change the Sample Clock Rate and Number of Samples to Read
parameters of the DAQ Assistant Express VI.
- LabVIEW support for events—You can now use the events feature in
LabVIEW to provide synchronous and asynchronous notification mechanisms for a
set of DAQ events.
- Querying of device capabilities—Additional DAQ device information,
including available physical channels and bus type, is available when querying
device properties.
- Report generation capability from MAX—You can now create a report in
MAX detailing your NI-DAQmx hardware configuration.
- Support for LabVIEW Project—NI-DAQmx supports the creation of tasks,
channels, and scales in the LabVIEW Project environment.
NI-DAQmx Known Issues
This section covers issues specific to NI-DAQmx.
Aborting Single-Point Reads and Writes in LabVIEW
Single-point reads and writes do not respond to the
Abort Execution button in LabVIEW.
DAQ Assistant Maximum Channel Count
The maximum number of channels you can have in a task created
with the DAQ Assistant is 512 channels.
DAQmx Is Read or Write Late Obsoleted
The existing DAQmx Is Read or Write Late function/VI has been
obsoleted and no longer has any effect. Applications that must check whether
they are maintaining real-time behavior have two options. For the strictest
checking, use the Wait for Next Sample Clock function/VI. Refer to your API
reference help, such as the LabVIEW Help or the NI-DAQmx C Function
Reference Help, for more information on this function/VI. To check only
whether the application misses any analog input samples, set the Report
Missed Samples property to True on the analog input task. In LabVIEW,
the Report Missed Samples property is in the Real Time property
node. For more details, National Instruments strongly recommends that you read
the document referred to by the Wait for Next Sample Clock function/VI.
Duplicate Count Prevention Defaults
The default setting for the duplicate count prevention
attribute/property on M Series and TIO-based counters has been changed. This
change affects all input counter operations, with the exception of single-point
edge counting and position measurements. Duplicate count prevention is now on
by default as long as the following conditions are met:
- The duplicate count prevention attribute/property has not been explicitly
set.
- The selected counter timebase source is not set to an internal
timebase.
- The prescaler attribute/property has not been set.
- The counter output event has not been configured.
To learn more, refer to Duplicate Count Prevention in
the NI-DAQmx help.
Existing .NET Project Produces Build Errors
If you are using NI-DAQ with a .NET language, an existing
project can produce build errors that read "error CS0011: Referenced class
'className' has base class or interface
'NationalInstruments.ISynchronizeCallbacks' defined in an assembly that is not
referenced. You must add a reference to assembly 'NationalInstruments.Common'."
To eliminate this error, add a reference to the NationalInstruments.Common
assembly to the project. This problem occurs when an existing project was built
with NI-DAQ 7.2 or earlier and is rebuilt with NI-DAQ 7.3 or later.
LabVIEW Long Property Names
When importing or exporting .ini
files and tab-delimited text, LabVIEW long property names are not supported.
Only English LabVIEW short property names, CVI property names, and C++/.NET
class.property names are supported.
.NET Remoting
Accessing objects in the DAQmx .NET class library from a remote
application domain with .NET Remoting is not supported.
NI DAQCard-6715 Analog Output
Hardware-timed single-point mode and hardware-timed nonbuffered
mode are nonfunctional. Your application is using hardware-timed nonbuffered
mode if you have set up a sample clock and a buffer size of 0, or set up a
sample clock, but do not begin writing until after you start the task. All other
waveform and static analog output modes work as expected.
NI-DAQmx .NET Framework 1.1 Help Shortcut
A shortcut to the NI-DAQmx .NET Framework 1.1 Help is
installed by default at Start»Programs»NI-DAQmx .NET
Framework 1.1 Help. This documentation is in the Microsoft Help 2.0
format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft
Help 2.0 viewer is installed with both Microsoft Visual Studio .NET and the
Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads
. If you do not have either of these products, you will need a standalone
Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers
are available for download, such as Helpware's H2Viewer.
Property Help for More»AI Convert»Rate
The property help for More»AI Convert»Rate in the
NI-DAQmx C Reference Help says NI-DAQmx uses the slowest AI Convert
Clock rate possible to allow for maximum settling time. That information is no
longer true. NI-DAQmx now uses the maximum AI Convert Clock rate plus an
additional 10 microseconds per channel settling time to compensate for most
potential system settling constraints.
Some Devices Enumerate Twice
Supported CompactRIO devices that fit into the NI USB-9162
carrier enumerate twice in MAX. When a device, such as the NI USB-9421, is first
installed, it appears as the NI USB-9162 before appearing as the correct
device.
USB Device Removal During a DAQ Operation
If a USB DAQ device is unplugged while a DAQ operation is being
performed, unexpected results may occur, including causing the operating system
to hang. In these occasional, extreme cases, you must reboot the computer. NI
recommends stopping all DAQ operations on a USB device before unplugging the
device from the computer.
Using the C++ API from Multiple DLLs in the Same Process
If you use the C++ API from multiple DLLs in the same process,
you must access the API from only one DLL at a time. You must stop using the API
in one DLL and destroy all API objects before using the API in another DLL.
Using NI-DAQmx and Traditional NI-DAQ (Legacy) on the
Same Computer
Existing applications developed with earlier versions of NI-DAQ
will run under Traditional NI-DAQ (Legacy). You can use both the Traditional
NI-DAQ (Legacy) API and the NI-DAQmx API on the same computer with the following
restrictions:
- Only one API controls a given device at one time.
– |
After using a device in NI-DAQmx, you must unreserve all NI-DAQmx tasks that
are using that device before you can use that device through Traditional NI-DAQ
(Legacy). If you use a device in NI-DAQmx and then use it in Traditional NI-DAQ
(Legacy) without unreserving the NI-DAQmx tasks, error code -10461 is returned. To unreserve NI-DAQmx tasks, call
the DAQmx Clear Task VI or functions. |
– |
After using a device in Traditional NI-DAQ (Legacy), you must reset the
device before you can use that device in NI-DAQmx, or error code -200324 is returned.
For SCXI devices, you must reset the communicating DAQ device in
Traditional NI-DAQ (Legacy) before using it in NI-DAQmx. For example, E Series
DAQ devices use lines 0, 1, 2, and 4 on port 0 to communicate with the SCXI
module. Error code -200158 is returned if you do
not reset the communicating device in Traditional NI-DAQ (Legacy) before using
it in NI-DAQmx as follows:
- Call the Traditional NI-DAQ (Legacy) Device Reset VI or the Init_DA_Brds function
- To reset devices in Traditional NI-DAQ (Legacy) from MAX, you must reset all
devices at once. Right-click the Traditional NI-DAQ (Legacy)
Devices folder in MAX and select Reset Driver for Traditional
NI-DAQ (Legacy). For a remote RT target, you must use the Traditional
NI-DAQ (Legacy) Device Reset VI.
|
- In an SCXI data acquisition system, you must use the same API to program all
devices—connected DAQ devices and inserted SCXI modules.
Refer to ni.com/support for
details and instructions about the following topics:
- How to add NI-DAQmx code to a Traditional NI-DAQ (Legacy) application
- How to run both Traditional NI-DAQ (Legacy) applications and NI-DAQmx
applications that use the same device
Support in NI-DAQ 8.0
Operating System Support
NI-DAQmx 8.0 and Traditional NI-DAQ (Legacy) version 7.4.1
support Windows 2000/XP.
NI-DAQmx 8.0 supports PharLap only with the LabVIEW Real-Time
Module 7.1.
Measurement Studio requires Visual Studio .NET 2003, which
requires Windows 2000/XP. If you are using the DAQmx .NET Library, the .NET 1.1
framework is required. .NET 1.1 requires Windows 2000/XP.
Windows NT users must use NI-DAQmx 7.5 or Traditional NI-DAQ
(Legacy) 7.4.
Windows Me/98 users must use NI-DAQ 7.1 or earlier. Windows 95
users must use NI-DAQ 6.9.3 or earlier
LabVIEW Real-Time for the Macintosh 7.1 will not be supported in
LabVIEW 8.0 due to low demand. However, National Instruments continues to
support PCI and USB data acquisition hardware using NI-DAQmx Base. Macintosh
systems can continue to serve as hosts to real-time targets. For more
information on supported products, refer to ni.com/mac.
For operating system-specific installation instructions, use the
Hardware Installation/Configuration Troubleshooter at ni.com/support/install.
To find and download an earlier version of NI-DAQ that supports
other operating systems, refer to ni.com/downloads.
NI Application Software Support
The following table lists the NI application software versions
supported by NI-DAQmx and Traditional NI-DAQ (Legacy). If you are not using NI
application software, refer to Microsoft Visual Studio Support.
NI Application Software |
Versions Supported by NI-DAQmx |
Versions Supported by Traditional NI-DAQ (Legacy) |
LabVIEW |
7.0 and later |
7.0 and later |
LabVIEW Real-Time Module |
7.1 1 and later |
7.0 and later |
LabWindows/CVI |
7.x and later |
6.0—7.x |
Measurement Studio |
7.x and later |
6.0—7.x2 |
1 To use LabVIEW Real-Time Module 7.1 with NI-DAQmx,
you must use NI-DAQmx 7.2 or later. |
2Traditional NI-DAQ (Legacy) does not include a
Measurement Studio C++ or .NET interface. |
Microsoft Visual Studio Support
The following table lists the programming languages and
Microsoft Visual Studio versions supported by NI-DAQmx and Traditional NI-DAQ
(Legacy).
Programming Language |
Visual Studio Versions Supported by NI-DAQmx |
Visual Studio Versions Supported by Traditional NI-DAQ
(Legacy) |
ANSI C |
6.0 and later |
6.0 and later |
C++ |
2003 (7.1)1 |
— |
Visual Basic 6.0 |
6.0 SP62 |
6.0 SP63 |
.NET Framework 1.1 Languages (C# and
Visual Basic.NET) |
2003 (7.1) |
— |
1 Requires Measurement Studio
7.x |
2 Support through ANSI C type
library |
3 Support through ActiveX |
Earlier versions of NI-DAQ support other application software
and language versions. To find and download an earlier version of a driver,
refer to ni.com/downloads.
Device Support
The following lists detail the devices supported in NI-DAQmx and
Traditional NI-DAQ (Legacy). Device support is divided into the following
categories:
Devices Supported Only in NI-DAQmx
NI-DAQmx supports the following devices:
- NI BNC-2096 TEDS device
- NI DAQPad-6015 for USB (does not have NI-DAQmx simulated device
capability)
- NI DAQPad-6015 for USB (BNC) (does not have NI-DAQmx simulated device
capability)
- NI DAQPad-6015 for USB (Mass Termination) (does not have NI-DAQmx simulated
device capability)
- NI DAQPad-6016 for USB (does not have NI-DAQmx simulated device
capability)
- NI PCI-4461 204.8 kS/s, 24-bit, 2 AI channel, 2 AO channel dynamic signal
acquisition TEDS device
- NI PCI-4462 24-bit, 4 AI channel dynamic signal acquisition TEDS device
- NI PCI-6010 16 AI channel device (does not have NI-DAQmx simulated device
capability)
- NI PCI-6122 500 kS/s, 16-bit S Series device
- NI PCI-6123 500 kS/s, 16-bit, 8-channel S Series device
- NI PCI-6132 4 channel, 32 MB S Series device
- NI PCI-6133 3 MS/s, 14-bit, 8 AI channel S Series device
- NI PCI-6143 250 kS/s, 16-bit, 8 AI channel S Series device
- NI PCI-6220 16 AI channel, 250 kS/s, 16-bit M Series device
- NI PCI-6221 (68-pin) 16 AI channel, 250 kS/s, 16-bit M Series device
- NI PCI-6221 (37-pin) 16 AI channel, 250 kS/s, 16-bit M Series device
- NI PCI-6224 32 AI channel, 250 kS/s, 16-bit M Series device
- NI PCI-6225 80 AI channel M Series device
- NI PCI-6229 32 AI channel, 250 kS/s, 16-bit M Series device
- NI PCI-6250 16 AI channel, 1 MS/s, 16-bit M Series device
- NI PCI-6251 16 AI channel, 1 MS/s, 16-bit M Series device
- NI PCI-6254 32 AI channel, 1 MS/s, 16-bit M Series device
- NI PCI-6259 32 AI channel, 1 MS/s, 16-bit M Series device
- NI PCI-6280 16 AI channel, 500 kS/s, 18-bit M Series device
- NI PCI-6281 16 AI channel, 500 kS/s, 18-bit M Series device
- NI PCI-6284 32 AI channel, 500 kS/s, 18-bit M Series device
- NI PCI-6289 32 AI channel, 500 kS/s, 18-bit M Series device
- NI PCI-6509 industrial 96-channel 5V/TTL/CMOS digital I/O device with high
current (24 mA)
- NI PCI-6510 digital I/O device
- NI PCI-6511 digital I/O device
- NI PCI-6512 digital I/O device
- NI PCI-6513 digital I/O device
- NI PCI-6514 digital I/O device
- NI PCI-6515 industrial 32 source/sink DI, 32 sink DO bank isolated digital
I/O device
- NI PCI-6516 digital I/O device
- NI PCI-6517 digital I/O device
- NI PCI-6518 digital I/O device
- NI PCI-6519 digital I/O device
- NI PCI-6521 relay board
- NI PCI-6528 industrial 24 DI, 24 DO CH/CH isolated digital I/O device
- NI PCI-6624 industrial 8-channel CH/CH isolated counter/timer device
- NI PCI-6722 13-bit, 8 channel AO device
- NI PCI-6723 13-bit, 32 channel AO device
- NI PCIe-6251 PCI Express device
- NI PCIe-6259 PCI Express device
- NI PXI-2501 FET multiplexer
- NI PXI-2503 relay multiplexer
- NI PXI-2527
- NI PXI-2529 128-crosspoint relay matrix
- NI PXI-2530 128-channel reed relay multiplexer/matrix
- NI PXI-2532 512-crosspoint matrix
- NI PXI-2564 16-SPST relay module
- NI PXI-2565 16-SPST relay module
- NI PXI-2566 16-SPDT relay module
- NI PXI-2567 64-channel relay driver
- NI PXI-2568 31-channel SPST relay module
- NI PXI-2569 100-channel SPST relay module
- NI PXI-2570 40-SPDT relay module
- NI PXI-2575 196x1 relay multiplexer
- NI PXI-2576 multi-bank multiplexer
- NI PXI-2584 15-channel multiplexer
- NI PXI-2585 10-Channel multiplexer
- NI PXI-2586 10-Channel SPST relay module
- NI PXI-2590 1x4 1.3 GHz mux
- NI PXI-2591 1x4 4 GHz mux
- NI PXI-2593 500 MHz dual 8x1 50 ohm multiplexer
- NI PXI-2594 1x4 2.5 GHz multiplexer
- NI PXI-2595 1x4 5.5 GHz multiplexer
- NI PXI-2596 dual 1x6 26.5 GHz multiplexer
- NI PXI-2597 1x6 26.5 GHz terminated multiplexer
- NI PXI-2598 dual 26.5 GHz transfer switch
- NI PXI-2599 dual 26.5 GHz SPDT
- NI PXI-4200 integrated signal conditioning module
- NI PXI-4204 8-channel 100 V analog input module
- NI PXI-4220 2-channel high-speed strain module
- NI PXI-4224 signal conditioning module
- NI PXI-4461 204.8 kS/s, 24-bit, 2 AI channel, 2 AO channel dynamic signal
acquisition device
- NI PXI-4462 24-bit, 4 AI channel dynamic signal acquisition TEDS device
- NI PXI-6122 500 kS/s, 16-bit S Series device
- NI PXI-6123 500 kS/s, 16-bit, 8-channel S Series device
- NI PXI-6132 4 channel, 32 MB S Series device
- NI PXI-6133 3 MS/s, 14-bit, 8 AI channel S Series device
- NI PXI-6143 250 kS/s, 16-bit, 8 AI channel S Series device
- NI PXI-6220 16 AI channel, 250 kS/s, 16-bit M Series device
- NI PXI-6221 (68-pin) 16 AI channel, 250 kS/s, 16-bit M Series device
- NI PXI-6224 32 AI channel, 250 kS/s, 16-bit M Series device
- NI PXI-6225 80 AI channel M Series device
- NI PXI-6229 32 AI channel, 250 kS/s, 16-bit M Series device
- NI PXI-6250 16 AI channel, 1 MS/s, 16-bit M Series device
- NI PXI-6251 16 AI channel, 1 MS/s, 16-bit M Series device
- NI PXI-6254 32 AI channel, 1 MS/s, 16-bit M Series device
- NI PXI-6259 32 AI channel, 1 MS/s, 16-bit M Series device
- NI PXI-6280 16 AI channel, 500 kS/s, 18-bit M Series device
- NI PXI-6281 16 AI channel, 500 kS/s, 18-bit M Series device
- NI PXI-6284 32 AI channel, 500 kS/s, 18-bit M Series device
- NI PXI-6289 32 AI channel, 500 kS/s, 18-bit M Series device
- NI PXI-6509 industrial 96-channel 5V/TTL/CMOS digital I/O device with high
current (24 mA)
- NI PXI-6511 digital I/O device
- NI PXI-6512 digital I/O device
- NI PXI-6513 digital I/O device
- NI PXI-6514 industrial 32 source/sink DI, 32 source DO bank isolated digital
I/O device
- NI PXI-6515 industrial 32 source/sink DI, 32 sink DO bank isolated digital
I/O device
- NI PXI-6521 relay board
- NI PXI-6528 industrial 24 DI, 24 DO CH/CH isolated digital I/O device
- NI PXI-6624 counter/timer device
- NI PXI-6722 13-bit, 8 channel AO device
- NI PXI-6723 13-bit, 32 channel AO device
- NI SC-2350 TEDS device
- NI SCXI-1130 256-channel reed relay multiplexer/matrix
- NI SCXI-1166 32-SPDT relay module
- NI SCXI-1167 64-channel relay driver
- NI SCXI-1169 100-channel SPST relay module
- NI SCXI-1175 196x1 relay multiplexer
- NI SCXI-1190 1.3 GHz quad 4x1 50 ohm multiplexer
- NI SCXI-1191 4 GHz quad 4x1 50 ohm multiplexer
- NI SCXI-1192 18 GHz 8-SPDT 50 ohm relay module
- NI SCXI-1193 quad 8x1 50 ohm multiplexer
- NI SCXI-1194 quad 1x4 2.5 GHz multiplexer
- NI SCXI-1195 quad 1x4 5.5 GHz multiplexer
- NI SCXI-1314T TEDS device
- NI SCXI-1521/B signal conditioning module
- NI SCXI-1600 USB module
- NI USB-6008 (does not have NI-DAQmx simulated device capability)
- NI USB-6009 (does not have NI-DAQmx simulated device capability)
- NI USB-6501 (does not have NI-DAQmx simulated device capability)
- NI USB-9201 500kS/s, 12-bit, 8-channel scanned AI device
- NI USB-9211A 12 S/s, 24-bit, thermocouple AI, 4-channel scanned AI
device
- NI USB-9215A 100 kS/s, 16-bit, 4-channel isolated SMIO AI device
- NI USB-9221 8-channel scanned AI device
- NI USB-9233 50 kS/s, 24-bit, 4-channel dynamic signal acquisition
device
- NI USB-9421 8-channel DI module
- NI USB-9472 8-channel DO module
- NI USB-9481 4-channel Form A SPST Relay DO module
Devices Supported in NI-DAQmx and Traditional
NI-DAQ (Legacy)
The following devices are supported in NI-DAQmx and Traditional
NI-DAQ (Legacy). You can calibrate SCXI devices only in Traditional NI-DAQ
(Legacy).
- NI DAQCard-6024E 200 kS/s, 12-bit, 16 AI channel, two AO channel, 8 DIO
line, two counter/timer device
- NI DAQCard-6036E 200 kS/s, 16-bit, 16 AI channel, two AO channel, 8
DIO-line, two counter/timer device
- NI DAQCard-6062E 500 kS/s, 12-bit, 16 AI channel device
- NI DAQCard-6715 for PCMCIA 1 MS/s 12-bit AO device
- NI DAQCard-DIO-24 for PCMCIA 24-channel 5V/TTL/CMOS digital I/O device
- NI PCI-4021 switch controller
- NI PCI-4472 102.4 kS/s, 24-bit, 8 AI channel dynamic signal acquisition
device
- NI PCI-4474 102.4 kS/s, 24-bit, 4 AI channel dynamic signal acquisition
device
- NI PCI-6013 200 kS/s, 16-bit, 16 AI, 8 DIO line, two counter/timer device
(does not have NI-DAQmx simulated device capability)
- NI PCI-6014 200 kS/s, 16-bit, 16 AI channel, two AO channel, 8 DIO line, two
counter/timer AI device (does not have NI-DAQmx simulated device
capability)
- NI PCI-6023E 200 kS/s, 12-bit, 16 AI channel, 8 DIO-line, two counter/timer
device
- NI PCI-6024E 200 kS/s, 12-bit, 16 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PCI-6025E 200 kS/s, 12-bit, 16 AI channel, two AO channel, 32 DIO-line,
two counter/timer device
- NI PCI-6031E 100 kS/s, 16-bit, 64 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PCI-6032E 100 kS/s, 16-bit, 16 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PCI-6033E 100 kS/s, 16-bit, 64 AI channel, 8 DIO-line, two counter/timer
device
- NI PCI-6034E 200 kS/s, 16-bit, 16 AI channel, 8 DIO-line, two counter/timer
device
- NI PCI-6035E 200 kS/s, 16-bit, 16 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PCI-6036E 200 kS/s, 16-bit, 16 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PCI-6052E 333 kS/s, 16-bit, 16 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PCI-6071E 1.25 MS/s, 12-bit, 64 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PCI-6110 5 MS/s, 12-bit, 4 channel device
- NI PCI-6111 5 MS/s, 12-bit, 2 channel device
- NI PCI-6115 10 MS/s 12-bit device
- NI PCI-6120 800 kS/s, 16-bit, 4 AI simultaneous-sampling device
- NI PCI-6503 24-channel 5V/TTL/CMOS digital I/O device
- NI PCI-6527 24 DI, 24 DO CH/CH isolated digital I/O device
- NI PCI-6533 (DIO-32HS) 32-channel 5 V TTL/CMOS high-speed digital I/O and
handshaking device
- NI PCI-6534 32-channel 5 V TTL/CMOS high-speed digital I/O and handshaking
device with onboard memory
- NI PCI-6601 counter/timer device
- NI PCI-6602 counter/timer device
- NI PCI-6703 16-bit AO device
- NI PCI-6704 16-bit AO device
- NI PCI-6711 1 MS/s, 12-bit, 4 channel AO device
- NI PCI-6713 1 MS/s, 12-bit, 8 channel AO device
- NI PCI-6731 1 MS/s, 16-bit, 4 channel AO device
- NI PCI-6733 1 MS/s, 16-bit, 8 channel AO device
- NI PCI-DIO-96 96-channel parallel digital I/O device
- NI PCI-MIO-16E-1 (PCI-6070) 12-bit, 1.25 MS/s, 16 AI channel, two AO
channel, 8 DIO-line, two counter/timer device
- NI PCI-MIO-16E-4 (PCI-6040E) 500 kS/s (1-channel), 250 kS/s (multichannel),
12-bit, 16 AI channel, two AO channel, 8 DIO-line, two counter/timer device
- NI PCI-MIO-16XE-10 (PCI-6030E) 100 kS/s, 16-bit, 16 AI channel, two AO
channel, 8 DIO-line, two counter/timer device
- NI PCI-MIO-16XE-50 20 kS/s, 16-bit, 16 AI channel, two AO channel, 8
DIO-line, two counter/timer device
- NI PCI-7041/6040E device for LabVIEW RT
- NI PXI-1010 8-slot PXI backplane with a 4-slot SCXI backplane chassis
- NI PXI-1011 4-slot PXI backplane with a 8-slot SCXI backplane chassis
- NI PXI-4021 switch controller
- NI PXI-4472 102.4 kS/s, 24-bit, 8 AI channel dynamic signal acquisition
device
- NI PXI-4472B 102.4 kS/s, 24-bit, 8 AI channel dynamic signal acquisition
device
- NI PXI-6025E 200 kS/s, 12-bit, 16 AI channel, two AO channel, 32 DIO-line,
two counter/timer device
- NI PXI-6030E 100 kS/s, 16-bit, 16 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PXI-6031E 100 kS/s, 16-bit, 64 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PXI-6040E 500 kS/s (1-channel), 250 kS/s (multichannel), 12-bit, 16 AI
channel, two AO channel, 8 DIO-line, two counter/timer device
- NI PXI-6052E 333 kS/s, 16-bit, 16 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PXI-6070E 1.25 MS/s, 12-bit, 16 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PXI-6071E 1.25 MS/s, 12-bit, 64 AI channel, two AO channel, 8 DIO-line,
two counter/timer device
- NI PXI-6115 10 MS/s, 12-bit device
- NI PXI-6120 800 kS/s, 16-bit, 4 AI simultaneous-sampling device
- NI PXI-6508 96-channel 5V/TTL/CMOS digital I/O device
- NI PXI-6527 24 DI, 24 DO CH/CH isolated digital I/O device
- NI PXI-6533 32-channel 5 V TTL/CMOS high-speed digital I/O and handshaking
device
- NI PXI-6534 32-channel 5 V TTL/CMOS high-speed digital I/O and handshaking
device with onboard memory
- NI PXI-6602 counter/timer device
- NI PXI-6608 counter/timer device
- NI PXI-6704 16-bit AO device
- NI PXI-6711 1 MS/s, 12-bit, 4 channel AO device
- NI PXI-6713 1 MS/s, 12-bit, 8 channel AO device
- NI PXI-6733 1 MS/s, 16-bit, 8 channel AO device
- NI SCXI-1000 4-slot chassis
- NI SCXI-1000DC 4-slot DC-powered chassis
- NI SCXI-1001 12-slot chassis
- NI SCXI-1100 32-channel AI module
- NI SCXI-1102 thermocouple amplifier module
- NI SCXI-1102B/C amplifier multiplexer module
- NI SCXI-1104/C multiplexer module
- NI SCXI-1112 thermocouple amplifier module
- NI SCXI-1120/D isolation amplifier module
- NI SCXI-1121 isolation amplifier with excitation module
- NI SCXI-1122 isolated multiplexer amplifier module
- NI SCXI-1124 analog output module
- NI SCXI-1125 isolation amplifier module
- NI SCXI-1126 isolated frequency input channel module
- NI SCXI-1127 32-channel relay multiplexer/matrix
- NI SCXI-1128 32-channel SSR multiplexer/matrix
- NI SCXI-1129 256-crosspoint relay matrix
- NI SCXI-1140 track-and-hold module
- NI SCXI-1141, SCXI-1142, and SCXI-1143 lowpass filter modules
- NI SCXI-1160 16-SPDT general-purpose relay module
- NI SCXI-1161 8-SPDT power relay module
- NI SCXI-1162 DIO module
- NI SCXI-1162HV DIO module
- NI SCXI-1163 DIO module
- NI SCXI-1163R 32-channel solid state relay
- NI SCXI-1520 strain gage input module
- NI SCXI-1530 and SCXI-1531 modules for accelerometers and microphones
- NI SCXI-1540 linear variable differential transformers (LVDT) module
- NI SCXI-1581 current excitation analog output module
Devices Restricted to Traditional NI-DAQ
(Legacy)
NI-DAQmx does not support the following devices. The following
devices are supported only in Traditional NI-DAQ (Legacy):
- NI AT-6022E 12-bit, 100 kS/s, 16-channel AI, 2-channel AO, 8 or 32-DIO
line, two counter/timer device
- NI AT-AI-16XE-10 100 kS/s, 16-bit, 16 or 64-channel, AI E Series device
- NI AT-AO-6 6-channel, 8-DIO line, 12-bit, AO device
- NI AT-AO-10 10-channel, 8-DIO line, 12-bit, AO device
- NI AT-DIO-32F 32-channel 5 V TTL/CMOS high-speed digital I/O and handshaking
device
- NI AT-MIO-16DE-10 100 kS/s, 12-bit, 16-channel, AI E Series device
- NI AT-MIO-16E-1 1.25 MS/s, 12-bit, 16 or 64-channel, AI E Series device
- NI AT-MIO-16E-2 500 kS/s, 12-bit, 16 to 64-channel, AI E Series device
- NI AT-MIO-16E-10 100 kS/s, 12-bit, 16-channel, AI E Series device
- NI AT-MIO-16XE-10 100 kS/s, 16-bit, 16-channel, AI E Series device
- NI AT-MIO-16XE-50 20 kS/s, 16-bit, 16-channel, AI E Series device
- NI AT-MIO-64E-3 500 kS/s, 12-bit, 16 or 64-channel, AI E Series device
- NI DAQCard-AI-16E-4 for PCMCIA
- NI DAQCard-AI-16XE-50 for PCMCIA
- NI DAQCard-6533 digital I/O for PCMCIA
- NI DAQPad-6020E 100 kS/s, 12 bit E Series device
- NI DAQPad-6052E 333 kS/s, 16-bit E Series device
- NI DAQPad-6070E 1.25 MS/s, 12-bit E Series device
- NI DAQPad-6507 for USB 96-channel 5V/TTL/CMOS digital I/O device with
built-in screw terminals
- NI DAQPad-6508 for USB 96-channel 5V/TTL/CMOS digital I/O device with
100-pin I/O connector
- NI PC-DIO-24 24-channel 5V/TTL/CMOS digital I/O device
- NI PC-DIO-96 96-bit parallel digital I/O device
- NI PCI-4451/4452/4454 dynamic signal acquisition and generation device
- NI PCI-4551/4552 dynamic signal acquisition device
- NI PCI-7030 RT Series device
- NI PXI-4551/4552 dynamic signal acquisition device
- NI PXI-7030 RT Series device
- NI 4350/4351 data loggers
Devices No Longer Supported in NI-DAQ 7.x
and Later
The following products are not supported in NI-DAQmx
7.x and later or Traditional NI-DAQ (Legacy) 7.x and will not
be supported in future versions of NI-DAQ. All references to unsupported
products, such as VXI-DAQ devices, should be ignored. You must use NI-DAQ
version 6.9.x or earlier to program these devices:
- NI AT-MIO-16F-5 multifunction DAQ device
- NI DAQCard-500 PCMCIA MIO device
- NI DAQCard-516 PCMCIA MIO device
- NI DAQCard-700 PCMCIA MIO device
- NI DAQCard-1200 PCMCIA MIO device
- NI DAQCard-AO-2DC PCMCIA low-cost AO and current loop DAQ device
- NI DAQPad-1200 DAQ device and control for parallel port
- NI DAQPad-MIO-16XE-50 16-bit DAQ device and control for parallel port
- NI Lab-PC
- NI Lab-PC+ PC/XT MIO device
- NI Lab-PC-1200 ISA MIO device
- NI Lab-PC-1200/AI PC/XT MIO device
- NI PC-516 16-bit, 50 kS/s MIO device
- NI PC-AO-2DC low-cost AO and current loop DAQ device
- NI PC-LPM-16/PNP MIO device for the PC
- NI PC-OPDIO-16 optically isolated DIO device for the PC
- NI PC-TIO-10 timing and DIO interface for the PC
- NI PCI-1200 12-bit, 100 kS/s MIO device
- NI SCXI-1200 12-bit DAQ and control module
- NI SCXI-2000 4-slot chassis
- NI SCXI-2400 serial interface module
- NI VXI-AO-48XDC DC setpoint module for VXI bus
- NI VXI-DIO-128 DIO module for VXI bus
- NI VXI-MIO-64E-1 12-bit MIO module for VXIbus
- NI VXI-MIO-64XE-10 16-bit MIO module for VXIbus
- NI VXI-SC-1000 carrier
- NI VXI-SC-1100 carrier
- NI VXI-SC-1102/B/C 32-channel multiplexer amplifier submodule
- NI VXI-SC-1150 carrier for SMBs
- NI VXI-TB-1000 terminal block
- NI VXI-TB-1303 terminal block
Development
Minimum
Processor |
Pentium III/Celeron 600 MHz or
Equivalent |
RAM |
128 MB |
Screen resolution |
800 x 600 pixels |
Operating system |
Windows 2000/XP or later |
Recommended Processor |
Pentium 4 or Equivalent |
RAM |
256 MB |
Screen resolution |
1024 x 768 pixels |
Operating system |
Windows 2000/XP or later |
Deployment
Minimum Processor |
Pentium 200 MHz or Equivalent |
RAM |
64 MB |
Screen resolution |
800 x 600 pixels or no screen |
Operating system |
Windows 2000/XP or later |
Recommended Processor |
Pentium III/Celeron 600 MHz or
Equivalent |
RAM |
256 MB |
Screen resolution |
1024 x 768 pixels or no screen |
Operating system |
Windows 2000/XP or later |
You must have Internet Explorer version 5.0 or later to use some
features of the NI-DAQ 7.x and later documentation, including the help
system and Device Document Browser.