October 2016
This file contains important information about the NI InsightCM™ Server software, including system recommendations, network requirements, installation instructions, and known issues.
Product Security and Critical Updates
Automating the Installation of NI Products
NI InsightCM is a software solution for online condition monitoring to be used with NI monitoring hardware. In the NI InsightCM web application, you can configure and manage NI condition monitoring devices, set alarm rules, view acquired data, determine how data is stored, and more. (Optional) NI InsightCM Enterprise Gateway Toolkit allows you to export feature calculations to external data historian software.
The following sections describe the recommended specifications for NI InsightCM Server.
| Systems with fewer than 10 NI Condition Monitoring Devices | Systems with fewer than 50 NI Condition Monitoring Devices | Systems with more than 50 NI Condition Monitoring Devices |
|---|---|---|
|
|
|
| Note (Optional) If you use NI InsightCM Server Enterprise Gateway Toolkit add-on with OSIsoft PI System software, you must install the OSIsoft PI Data Access software and activate an appropriate run-time license on the server machine. |
NI InsightCM Server has the following network requirements:
| Port | Type |
|---|---|
| 82 | TCP (inbound and outbound) |
| 482 | TCP (inbound and outbound) |
| 5353 | UDP (inbound) |
| 6343 (configurable) | TCP (inbound and outbound) |
| 8002 | TCP (inbound and outbound) |
| 2343 | UDP (inbound and outbound) |
| 6000-6010 | UDP (outbound) |
| 27016 | TCP (inbound and outbound) |
National Instruments recommends you use the following browsers and screen resolution to access the InsightCM web application:
Complete the following steps to install the NI InsightCM Server software:
| Note Visit ni.com/info and enter the Info Code USBGuideSpec for the USB flash drive user guide and specifications. |
Complete the following steps to configure the device transceiver settings so that the device can reliably communicate with NI InsightCM Server:
| Note Do not use the default localhost value as the hostname for the server. Select the address that best suits your use case based on the criteria listed previously. |
| Note After you save the new server settings, reset the device connection to get the device to send the updated connection information files to the server. |
Complete the following steps if you want to switch to metric units:
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
For information about how to upgrade your NI InsightCM software from 2.0 to 3.0, visit ni.com/info and enter the Info Code InsightCMUpgrade.
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI InsightCM.
Refer to Getting Started with NI Condition Monitoring Devices and NI InsightCM Server, available on the NI InsightCM Server installation USB drive as gettingStarted_InsightCMServer.pdf, for instructions for completing the setup tasks required to connect NI Condition Monitoring Devices to NI InsightCM Server and start acquiring and viewing data.
Refer to the NI InsightCM Server Configuration and Monitoring Help, accessible by clicking Help in the top-right corner of the NI InsightCM web application, for information about NI InsightCM Server and NI Condition Monitoring Devices.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.6, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Copyright
© 2014–2016 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374893G-01